It takes only a second to turn on the remote.
Used carefully and compassionately, it can serve to make dog training more effective. It goes through the phases of Beep, Vibration, and Shock to better condition your dog and give you, the owner full control of the training process.
– 4 modes: static shock/ vibration/ beep/ light
– 100 levels of vibration and static
– Rechargeable collar remote and receiver
– Easy to read large clear LCD display
– Waterproof collar receiver
– Adjustable strap
How to Connect the Transmitter with the Collar Receiver:
1.Turn on the Transmitter by holding the MODE button for 5 seconds, and choose channel 1 or 2 to encode
2.Turn on the Receiver Collar by pressing the on/off button or if its already turned on
3.Then press the on/off button again and hold it for 5 seconds, the LED light will start to flash
4.You can hear 1st beep from the receiver collar, press the “Y” button on the Transmitter immediately.
About the Water Resistance
– Water resistance Level: IP3(Can withstand water equivalent to 0.7 liters per minute if the lid is secured properly)
– The collar can be worn in light drizzles but must be removed before bathing or swimming
– Please note that submerging the collar in water WILL cause damage
2 x Receiver Collar
2 x Adjustable Belt
1 x Remote Transmitter
1 x Charger
1 x Test Bulb
1 x Metal Probes
4 x Screw Caps
1 x Guide
Note for Use:
when first using, you should check under the dog’s neck to make sure there’s no wound. It’s also a good idea to brush their coat and check their skin daily. If you need any help when you use the product, please feel free to contact our customer service for help.